Easy Ways to Clean and Maintain a Swimming Pool

Easy Ways to Clean and Maintain a Swimming Pool

Swimming pool maintenance is one of the most important things in managing your property. Based on a survey conducted by Bukit Visa regarding significant facilities that are highly sought after by guests, the swimming pool is one of the most sought after facilities. Not only limited to one type of property such as a villa, guests are also looking for this one facility in a guesthouse. That way, how to keep the swimming pool always clear is one thing that is needed.

In fact, maintaining a swimming pool is something that is easy. The good news is, you can do your own pool maintenance as long as you know the drugs and equipment used. Consistency is the main key. Swimming pools that are not maintained have the potential to become a breeding ground for disease, disrupt the natural scenery of guests, and increase the cost of swimming pool maintenance later in the day. On the other hand, if you know how to maintain a swimming pool, you can avoid negative health effects and reduce the cost of renovations later in the day.

Then how to keep the swimming pool so that it is always clear?


A combination of chemicals is used to maintain the clarity of the water and prevent the water from producing odors. Of course, this needs to be adjusted to the conditions of the swimming pool such as dimensions and volume. Excessive use of chemicals certainly cannot help maintain your swimming pool water. On the other hand, excessive amounts of chemicals can make the chemical smell in the water smell strong and don’t often cause irritation to the skin and eyes. Here are some things that you can use as a reference in checking the chemical content of pool water:

The perfect PH level ranges from 7.2 to 7.8. By maintaining the PH level of swimming pool water, you can avoid skin and eye irritation. Not only that, by having the perfect PH level, the use of chlorine will be more efficient. Chlorine is one of the chemicals used to kill bad germs in swimming pools.


  • The complete content of chlorine ranges from 1.0 to 1.5 ppm
  • Aim for 30–50 parts per million (ppm) of cinnamic acid in your swimming pool. This material aims to protect chlorine from exposure to sunlight.
  • Target 60–120 ppm of alkalinity, wherein the alkalinity is used to protect the PH . balancer
  • Regularly brushing the swimming pool ceramic cubicle

Brushing swimming pool tiles regularly can keep mud, dust or chemicals from building up that can lead to rust. Ideally, this can be tried on a regular basis i.e. once a week or when you see piles starting to appear in the pool cubicle.

Run the vacuum periodically

The third method of keeping the swimming pool clean is to sterilize the bottom of the pool with a vacuum. Dirt that accumulates on the surface often breaks down and falls below the surface of the pool. For stubborn dirt due to dust, you can use a plastic scrubber to brush it.

This activity needs to be done periodically, once a week to keep your swimming pool clean and clear. Or you can adjust to the level of dirtiness of your swimming pool such as being tested every day and every morning, depending on the condition of your swimming pool.

Monitoring the pool surface


One thing that cannot be avoided is monitoring the surface of the swimming pool for leaves, plastic, or other garbage. You can use a long pole skimmer to catch plastic, leaves, or other debris on the surface of the pool.

Keep the swimming pool rotating

One way to keep the content of cleanliness and clarity in pool water is to maintain the rotation of the swimming pool. This needs to be tested and monitored every day so that the water always has sufficient oxygen and waste debris can be filtered optimally. Make sure the filter/cycle equipment is on for a minimum of 6 hours per day. On the other hand, avoid turning on and off the rotation equipment/filter very often but can be overcome by using an automatic timer.

Then, the next question that is often asked is how to maintain a swimming pool in the rain?


The first thing that needs to be observed is to always keep the PH content of the swimming pool water in the perfect position. When it rains. Sometimes the PH of swimming pool water tends to change due to the accumulation of rainwater. It’s just that you need to monitor this matter.

When the PH content is below 7.2 to 7.8 you can add soda ash to restore the PH content of the swimming pool water. Soda ash can be used to raise the PH level. However, you need to increase this white powder little by little until the PH content is back to normal. Conversely, when the PH content exceeds 7.2 to 7, 8 you can increase the HCL Acid. By increasing this one solution little by little you can